Stud sensor Pro LCD quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings. Its easy-to-read display screen indicates stud edge, the patented SpotLite Pointing System shines a beam of light on the wall to identify the target, and Wire warning detection indicates the presence of live AC voltage.
- Stud Scan mode locates the edges of wood or metal studs up to 3/4 in. (19 mm) deep
- DeepScan mode doubles the scanning depth to 1 1/2 in. (38 mm)
- Easy-to-read LCD display indicates when a stud edge is approached
- Patented SpotLite Pointing System and audio tone signals when the stud edge is reached
- WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2 in. (51 mm) deep
- Zircon’s patented “over-the-stud” indication alerts user to start the scan in a new location if scanning begins over a stud
- Brand: Zircon
- Product Type: Stud Sensor Pro LCD
- Colour: Yellow/Black
- Battery Type: Alkaline
- Battery Voltage: 9 V
- Operating Temperature: 20° to 105°F (-7° to 41°C)
- Storage Temperature: -20° to 150°F (-29° to 66°C)
- Humidity (Non-Condensing) : 5-90% RH
- Length: 15.4 cm
- Width: 6.8 cm
- Height: 2.8 cm
- Weight (without Battery): 0.09 kg
- Wire Warning (Position Accuracy): Typically 90-250 V at 50-60 Hz within 6 in. (152 mm) of a hot unshielded Accuracy wire in drywall
- Wire Warning (Depth): In typical wall with Romex wiring, wire can be detected up to 2 in. (51 mm) deep
- StudScan Mode: Up to ¾ in. (19 mm)
- DeepScan Mode: Up to 1½ in. (38 mm)
- Up to a depth of ¾ in. (19 mm): Typically within ¹⁄₈ in. (3 mm) using the dual scan and mark procedure
- Up to a depth of 1½ in. (38 mm): Typically within ³⁄₁₆ in. (5 mm) using the dual scan and mark procedure